Professional SPF roof installation, coating, and insulation in Lomita, CA. Free inspections. Call today for a no-obligation estimate.
Comprehensive spray foam roofing and insulation services tailored for Lomita properties.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Property owners in Lomita, CA deal with the same roofing and insulation challenges as everywhere else — leaking flat roofs, sky-high energy bills, deteriorating roof coatings, and contractors who apply band-aid fixes that fail within a season. Lapolla Industries takes a different approach: we find the root cause, apply the right spray foam solution, and back it with a real warranty.
With over 19,323 residents depending on reliable buildings, Lomita needs contractors who show up, do the work right, and stand behind it. Lapolla Industries has built our reputation on exactly that — thousands of spray foam roofing and insulation projects completed nationwide, with the same attention to quality whether the building is a 500-square-foot garage or a 100,000-square-foot warehouse.
Here is what sets Lapolla Industries apart from other contractors in Lomita.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Have questions about spray foam in Lomita? We have answers.
A properly installed SPF roof in Lomita can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam insulation costs in Lomita typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Lomita homeowners see a full return on investment through energy savings within 3 to 5 years.
Spray foam is one of the best solutions for flat and low-slope roofs in Lomita. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Absolutely. SPF roofing performs exceptionally in both extremes because the closed-cell foam provides continuous insulation without thermal bridging. In hot Lomita summers, the reflective coating reduces surface temperatures by up to 50 degrees. In winter, the insulation value keeps conditioned air inside.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Lomita we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Lomita, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Our reputation is built on results. Here is what our customers say.
"They sprayed closed-cell foam in our attic and the difference was immediate. Our upstairs bedrooms are finally comfortable year-round and our heating bill dropped by about thirty percent. The crew was in and out in one day."
"We had a persistent leak that three different contractors could not find. Their team used moisture scanning equipment and pinpointed it to a failed pipe boot in minutes. Fixed it the same day. Incredible diagnostic work."
"Our old three-layer built-up roof was beyond saving. They stripped everything down to the deck, repaired the substrate, and installed a new spray foam roofing system. The building is better insulated now than it has ever been."
Looking for a spray foam contractor near Lomita? We serve these surrounding areas too.